Home    FireCute Series  FubarIO MK2
FubarIO MK2

FubarIO MK2


FubarIO MK2


DAC/ADC


DAC/ADC
FubarIO MK2 is a plug and play USB device of high quality used for recording and playback. With USB as its media, FubarIO MK2 works anytime anywhere when pugged in without installing any drivers. It fits any kinds of systems, like Windows, Unix, Mac OS. Adopting the audio codec chip, FubarIO MK2 can mutually trasmit signal (a mutual transmission between digital signal and analog signal), doing the recording and playback at the same time. Also, it can adjust the input level and monitor the input signal, which caters to the need of advanced function of recording.


€ 249.00


  • Product info

DAC/ADC
FubarIO MK2 is a plug and play USB device of high quality used for recording and playback. With USB as its media, FubarIO MK2 works anytime anywhere when pugged in without installing any drivers. It fits any kinds of systems, like Windows, Unix, Mac OS. Adopting the audio codec chip, FubarIO MK2 can mutually trasmit signal (a mutual transmission between digital signal and analog signal), doing the recording and playback at the same time. Also, it can adjust the input level and monitor the input signal, which caters to the need of advanced function of recording.

Specification
* Amplifier Structure: Low pass filter with 2Vrms output
* Power Structure: Virtual-Ground power supply
* Sample Rate (Supported):
Playback: 24-bit, 8kHz~96kHz
Recording: 24-bit, 8kHz~96kHz
* Circuit Protect: Output short / Over current protect

Audio Performance - Playback (2Vrms output, 24-bit / 48kHz)
Frequency response (From 40Hz to 15kHz): +0.02dB ~ -0.04dB
Noise level (1kHz, A-Weighted): -94.6dB
Dynamic range (1kHz, A-Weighted): 95.9dB
THD%: 0.0022%
Stereo crosstalk: -95.9dB

Audio Performance - Recording (2Vrms output, 24-bit / 48kHz)
Frequency response (From 40Hz to 15kHz): +0.01dB ~ -0.09dB
Noise level (1kHz, A-Weighted): -98.8dB
Dynamic range (1kHz, A-Weighted): 98.7dB
THD%: 0.0034%
Stereo crosstalk: -89.2dB

Chips
* USB Codec: Tenor - TE7022
* A/D Converter: Cirrus - CS5343
* D/A Converter: Wolfson - WM8761
* OPAmp: TI - NE5532

Connectivity
* USB interface (USB 1.1)
* Line Output : 1 of RCA jack - Playback
(Users can change the function to monitor the recording by the switch on faceplate)
* Line Input : 1 of RCA jack - Recording
(Users can adjust the entered level by the knob on faceplate)

System Requirements
* Intel® Pentium® 2, Celeron® 800MHz or higher computer system
* Microsoft® Windows 2000® (Service Pack 4) or Windows® XP(SP1)
* 128MB RAM
* Available USB port

Packing
* FubarIO MK2
* DC24V 0.5A power adapter
* RCA wire
* USB wire
* User manual
* Warranty card
* Wrench

Weight/Size
* Weight: 678g
* Net Weight: 316g
* Size(H*W*D): 308mm * 201mm * 65mm
* Net Size: 107mm * 80mm * 53mm